The following are instructions for setting the Extended and Retracted Height on the ValueLine 30003 and 30004 TV Lift (wifi version).
Lifts Supported:
- 30003 ValueLine 2800 TV Lift (wifi version)
- 30004 ValueLine 3900 TV Lift (wifi version)
Tools Needed:
- None
Set Extended Memory Height
Instructions:
1. With the wired remote, press and hold the the UP button until the lift goes to the height that you want to set.
2. When the lift is at the optimal extended height, press and release the M button once and then the 1 button on the wired remote.
The lift will now go to this set extended height when the UP button is pressed on the wireless RF remote.
Set Retracted Memory Height
Instructions:
1. With the wired remote, press and hold the DOWN button until the lift goes to the height that you want to set at its lowest point (retracted height).
2. When the lift at its optimal retracted height, press and release the M button once and then the 2 button on the wired remote.
The lift will now go to this set retracted height when the DOWN button is pressed on the wireless RF remote.
Video Instructions:
For video instructions on setting the extended and retracted heights on the ValueLine 30003 and 30004 TV Lifts, please click the link below:
Setting Extended and Retracted Height on ValueLine TV Lift (wifi version)
Need More Help?
Please contact our technical support team at 800-215-1990 for further troubleshooting or click the following link to file a support ticket:
https://touchstonehomeproducts.freshdesk.com/support/tickets/new
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article