How-To: Clear the Memory On the ValueLine TV Lift - 30003 and 30004 (non-wifi version)

PROBLEM: My Valueline TV Lift goes down when I press the UP button on the wireless remote on my Valueline TV Lift.  Or, my Valueline TV Lift does not raise all the way to the top when I press the UP button on my Valueline TV Lift.

SOLUTION: The memory height on my Valueline TV Lift is set too low or the bottom height is set to high and needs to be cleared.

Lifts Supported:

- 30003 (non-wifi): Valueline 30003 TV Lift

- 30004 (non-wifi): Valueline 30004 TV Lift

Tools Needed:

- None

Instructions:

1. With the Wired Remote 32802, press the UP button until the lift goes all the way up to the extended height.

2. When the lift is all the way extended, press and release the M button on the Wired Remote 32802

3. The lift will now go all the way up and down with the wireless remote 32803

Video Instructions:

For instructions on clearing the memory height on the ValueLine 30003 and 30004 TV Lift, please click the link below:

Clearing Memory Height on ValueLine 30003 and 30004 TV Lift (non-wifi version)

Need More Help?

Please contact our technical support team at 800-215-1990 for further troubleshooting or click the following link to file a support ticket: 

https://touchstonehomeproducts.freshdesk.com/support/tickets/new