How do I install my fireplace in the Encase Surround Mantel?

Modified on Thu, 14 Nov at 2:50 PM

1. Remove the fireplace’s front glass by removing the front glass screws from the top left and right corners of the fireplace.

2. Remove the mounting screw covers from each side.

3. Identify the 2 mounting screw holes on each side

4. Connect your fireplace to electric power. Ideally behind the mantel. (Please don’t use extension cords for electric fireplaces.)

5. Lift the fireplace and place in the recessed area of them mantel, bottom first. Then push in the top after resting the fireplace on the base of the mantel opening.

6. Secure the fireplace to the mantel using the screws in the 2 mounting holes on each side.

7. Replace the mounting screw covers.

8. Insert your desired media or log set.

9. Replace the fireplaces front glass.