1. Unscrew two screws securing the glass panel to the firebox.
2. Gently open the fireplace by pulling the top part of the glass panel outwards. (The glass panel is being held by a magnet)
3. Securely hold the glass panel and lift it upwards to remove it from the fireplace, then gently place it on a soft surface.
4. Now, unscrew the screws holding the downlight box. Inside of the downlight box, you will find LED light strips connected to the fireplace.
5. There are 2 plastic clips that hold light strips attached to the downlight box. To remove the light strip, squeeze the head of each clip with pliers and gently pull the light strip to take it off the spacer. You will then be able to disconnect it from the fireplace.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article