Whisper Lift II
Setup and Operating the Whisper Lift II – continued
Pairing Wireless Remote to Lift
Tools Needed:
- Paper Clip
Instructions:
1. On the control box, there will be a hole to the right of the word KEY.
2. With a straightened out paper clip, push the paper clip into the hole and hold for 3 seconds until the indicator light on the control box turns OFF.
3. Press any button (UP, DOWN, or STOP) on the WIRELESS REMOTE to pair the remote control to the control box. If you are successful, the red light on the control box will flash 3 times and turn ON solid RED. The wireless remote control is now paired to the lift.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article